Optical products

Fiber optic patch cable

blessedsan — Tue, 14 Sep 2010 02:44:40 +0000

We can offer the following fiber optic patch cable

Features of Fiber optic patch cables:
Low insertion loss, high return loss
High credibility and stability
Excellent mechanical endurance
Good in repeatability and exchangeability

Specification and performance

	Single mode	Multi mode
Insertion loss (typical ＆value) (dB)	≤0.3	≤0.3
Return loss (typical ＆value) (dB)	PC≥45、UPC≥50、APC≥50	≥36
Duplicated (dB)	≤0.1
Interchangeable (dB)	≤0.2
Inserts pulls out the number of times (time)	≥1000
Operating temperature (℃)	-25~+70 / -40~+80 /-40~+75

Odering information and Part number system
Terminal 1 :FC SC LC ST MU MTRJ E2000 SMA DIN
End-face type: UPC,APC
Terminal 2: FC SC LC ST MU MTRJ E2000 SMA DIN PIGTAIL
End-face type : UPC,APC
Fiber core S=Simplex D=duplex
Fiber type S=Singlemode 9/125 5=Multimode 50/125 6=Multimode 62.5/125
Cable outer dimension A=3.0mm B=2.0mm C=0.9mm
Cable outer coating material: P=PVC,L= LSZH
Cable length customized

Part No. example: SCUPCLCUPCDSAP20=SC/UPC-LC-UPC,duplex,single mode,3.0mm diameter,PVC,20 Meters length

Applications of fiber optic patch cords :
FTTH application
Premise installations
Data processing networks
Wide Area Networks (WANs)
Telecommunication networks
Industrial ,mechanical and military

Samples (Fiber optic patch cords): Available

Warranty: One year

Datasheet and price list: Contact to get

Optical adapter

blessedsan — Tue, 14 Sep 2010 02:51:27 +0000

Fiber optic adapters is also called mating sleeves,which are used to connect optical connectors of same type, such as FC, SC and ST. optical adapters are widely uses in light distribution frame(ODF), the optical fiber communications equipment, the measuring appliance and so on.

Features of optical adapter:
The optical adapter connects fiber transmission by its placket tube. We offer various shapes of high-performance adapters to ensure maximum connectivity between the fiber jumper. In order to fix a varity of board level, our company designed various sophisticated fixed flange.

Performance Specifications

Insertion loss(dB)	≤ 0.20
Duplication (dB)	≤ 0.10
Interchangeability (dB)	≤ 0.20
Sleeve material	Ceramics
Operating temperature (℃)	-25 ~ +70	-40 ~ +80	-25 ~ +70
Storage temperature (℃)	-40 ~ +85

Ordering Information

Interface type

End-face type

Mode

Simplex or Duplex

FCSCST

MTRJ

DIN

MPO

E2000

U=UPCA=APC

Single modeMultimode

SimplexDuplex

We also offer hybrid adapters,which are used to connect optical connectors of different type, like SC to ST adapter etc.Click to view hybrid adapters .

Hybrid adapter

blessedsan — Mon, 20 Sep 2010 11:12:53 +0000

Hybrid adapters offer a solution for hybrid applications where the two different kinds of optical connectors or cable assemblies need to be linked with each other.

SC to ST hybrid adapter

SC to ST hybrid adapters are with plastic housing, flange type,zirconia sleeve for single mode and broze sleeve for multimode.Blue for single mode PC and beige for multimode PC.

FC to ST hybrid adapter

FC to SC hybrid adapters are also flange type wit plastic housing,Blue for single mode PC and beige for multimode PC.

SC to FC hybrid adapter

SC to FC hybrid adapter are available with plastic housing and metal housing.plastic body adapter are flange type and metal adapter are square type.

SC to LC hybrid adapter

SC to LC hybrid adapter are plastic housing flange type.
FC to LC hybrid adapter

Bare fiber adapter

Performance Specifications

Insertion loss(dB)	≤ 0.20
Duplication (dB)	≤ 0.10
Interchangeability (dB)	≤ 0.20
Sleeve material	zirconia sleeve, broze sleeve
Operating temperature (℃)	-25 ~ +70	-40 ~ +80	-25 ~ +70
Storage temperature (℃)	-40 ~ +85

Optical attenuator

blessedsan — Tue, 14 Sep 2010 02:56:58 +0000

Optical attenuators are used in the fiber optic links to reduce the optical power at a certain level.

Types of fiber optic attenuators:
1. Female to male plug style optical attenuator (MU, SC, FC, ST, LC) PC& APC polish available
2. Flange stype fiber optical attenuator
3. Adjustable fiber optical attenuator (FC style) Attenuation scale:0~30dB
4. IN-Line style fiber optical attenuator

Features of fiber optic attenuators:
- Low insertion loss
- Attenuation from 1dB to 30dB
- Single mode and Multi mode versions
- PC, UPC, and APC polish types optional

Specifications of fiber optic attenuators:

Items	Parameters
Operating wavelength：	1250~1620nm
Attenuation Value：	1dB~10dB（1dB step），15，20，25，30dB
Connector style：	FC/PC、SC/PC、FC/APC 、SC/APC 、LC、Customer
Attenuation accuracy：	1~9dB（±0.5dB）； 10~20dB（±1.0dB）； 21~30dB（±1.5dB）
Reflection loss：	≥50dB（UPC）， ≥65dB（APC）
PDL：	<0.2dB
Operating temperature：	-25℃~+70℃
Storage temperature:	-40℃~+85℃
Thermal stability：	0.3dB/℃
Power：	1W

optical coupler

blessedsan — Tue, 14 Sep 2010 02:49:44 +0000

Optical coupler Description
Fiber Optic Coupler
Operating wavelength (nm) 1310 1490 1550
Bandwidth (nm) 1310-401490-101550-40
Coupling ratio (%) 1~50
Typical excess loss(dB) ≤0.15
PDL(dB) ≤0.10
Typical Insertion Loss (dB) ≤3.6
Min directivity(dB) ≥55
Temperature coefficient (dB/) ≤0.002
Operating temperature() -40~+70
Storage temperature() -40~+85
Max operating power (mW) ≥300
Max tensile strength(N) ≥5
Package dimension(mm) Φ3.0*50 as customer required
Industry standard bellcore Telcordia GR-1221-CORE

Types of optical coupler

Optical coupler over dozens of species, mainly general-purpose, Darlington type, Schmidt-type, high-speed type, optical integrated circuits, optical fiber, optical Min thyristor type, light-sensitive field-effect tube.

PLC splitter

blessedsan — Tue, 14 Sep 2010 02:50:36 +0000

Features of PLC splitter Low insertion loss Low PDL High return loss Wide operating wavelength Wide operating temperature Compact size Environmental & mechanical stable Application of PLC splitters FTTx systems Optical LAN, Metro, WAN networks Passive optical networks CATV networks We offer quality custom PLC splitter at competitive price Ordering information for PLC splitter

Port	12=1×2,14=1×4,18=1×8,116=1×16,132=1×32,164=1×64, 24=2×4,28=2×8,216=2×16,232=2×32
Fiber Type	D=G652D, A=G 657A
Package	S=Steel tube; A=ABS box
Input Fiber Type	L=900µm Loose tube, S=2.0mm, R=3.0mm, B=250µm Ribbon Fiber, 0=Adapter
Output Fiber Type	L=900µm Loose tube, S=2.0mm, R=3.0mm, B=250µm Ribbon Fiber, 0=Adapter
Pigtail Length	05–20=0.5–2.0m, A=Adapter, X=Others
Connector Type	FU=FC/UPC, FA=FC/APC, SU=SC/UPC, SA=SC/APC,ST=ST/UPC, LU=LC/UPC, LA=LC/APC,N=None, X=Others

Package Dimensions (mm)

P1	40x4x4 steel tube	P10	90x20x6 steel tube
P2	45x4x4 steel tube	P11	100x40x6 steel tube
P3	45×4.5×4 steel tube	D	90x20x9.5 plastic case
P4	50x7x4 steel tube	E	100x80x10 plastic case
P5	60x7x4 steel tube	F	141x115x18 plastic case
P6	60x12x4 steel tube	K	120x80x18 plastic case
P7	65x7x4 steel tube	XU	1,2,3,4U 19’’ Rack Mount
P8	80x12x4 steel tube	XG	1,2,3,4U LGX’ Metal Rack Mount
P9	80x20x6 steel tube	X	Custom Specifies

Performance Specifications

PLC splitter	Unit	Parameter
Operating Wavelength	nm	1260～1650
Typ.Insertion Loss	dB	16.8
Max.Insertion Loss	dB	17.2
Max.Uniformity	dB	1.7
Max.TDL	dB	0.5
Max.PDL	dB	0.3
Min.Return Loss	dB	50
Min.Directivity	dB	50
Operating Temperature	℃	-40～+85
Storage Temperature	℃	-40～+85
Package Dimensions(L×W×H)	mm	50×7×4

Note:All the specification data are for PLC splitter without connectors.

If you want to learn more details about fiber splitter, please email us, we will send you detail specification sheet.

Optical connector

blessedsan — Tue, 14 Sep 2010 02:54:00 +0000

Fiber optic connector types

The connector can be supplied as a pre-assembled one-piece connector or as connector kits.

LC Connector

LC stands for Lucent Connector. LC connector is push and pull type. The LC fiber connector has good performance for single mode and are widely used in fiber optic patch cord.

SC Connector

SC Optical connector offers excellent packing density, and its push-pull design resists fiber end face contact damage.

ST Connector

ST fiber connectors are a good choice for easy field installations; ST connector is metal structure. it is a push-pull type, not screw type. Ferrule of ST fiber optic connector is exposed outside..

FC Connector

FC Optical connector has a floating ferrule that provides good mechanical isolation; Same as SC fiber optic connector, FC connector is also invented by NTT Company. FC has metal housing, screw structure, FC connector and SC connector have the same ferrule and sleeves.

E2000 Connector

MTRJ optical Connector

MT-RJ optical connector was developed based on MT connector which is commonly used for data transmission; it has a RJ-45 style structure, so called MT-RJ. MTRJ connector is with duplex fiber channel inside one single connector, the space between the two channels is 0.75mm.

MU Fiber Optic Connector

MU stands for Miniature unit Coupling; MU has the smallest single ferrule, so it is welcome for densely installation. NTT has developed a variety of MU connectors.

SMA Fiber Optic Connector

DIN Fiber Optic Connector

Escon connector

FDDI connector

D4 connector

Optical connector can be supplied as a pre-assembled one-piece connector or as connector kits.

Optical connectors are installed on fiber patch cable ends to provide cable attachment to a receiver, transmitter or other cable. Optical connectors can enable quicker connection and disconnection. All connectors have 4 basic components: connector body, ferrule, cable and coupling device.

Features of optical connector

Low insertion loss and back reflection loss
Free-floating ceramic ferrule
UL-rated plastic housing and boot
Boots in a variety of colors
High precision alignment

Fiber optic connectors chart

Optical connector	Long form	Coupling type	Ferrule diameter	Standard	Typical applications
FC connector		Screw	2.5mm	IEC 61754-13	Datacom, telecom, measurement equipment, single-mode lasers; becoming less common
ST connector	Bayonet	Bayonet	2.5mm	IEC 61754-2	Multimode, rarely single-mode; APC not possible (note 3)
SC connector	Subscriber Connector	Snap (push-pull coupling)	2.5mm	IEC 61754-4	Datacom and telcom; extremely common
LC connector	Lucent Connector	Snap	1.25mm	IEC 61754-20	High-density connections,SFP transceivers,XFP transceivers
MPO/MTP connector		Snap (multiplex push-pull coupling)	2.5×6.4mm	IEC-61754-7; EIA/TIA-604-5 (FOCIS 5)	SM or MM multi-fiber ribbon. Same ferrule as MT, but more easily reconnectable.[2]?Used for indoor cabling and device interconnections. MTP is a brand name for an improved connector, which intermates with MPO.[3]
MT-RJ connector		Snap (duplex)	2.45×4.4mm	IEC 61754-18	Duplex multimode connections
MU connector	Miniature unit	Snap	1.25mm	IEC 61754-6	Common in Japan
E-2000 connector		Snap, with light and dust-cap	2.5mm	IEC 61754-15	Telecom, DWDM systems;
ESCON connector	Enterprise Systems Connection	Snap (duplex)	2.5mm		IBM mainframe computers and peripherals
D4 connector		Screw	2.0mm		Telecom in the 1970s and 1980s, obsolete
MT connector	Mechanical Transfer	Snap (multiplex)	2.5×6.4mm		Pre-terminated cable assemblies; outdoor applications[2]
SMA 905 connector	Sub Miniature A	Screw	typ. 3.14mm		Industrial lasers, military; telecom multimode
SMA 906 connector	Sub Miniature A	Screw			Industrial lasers, military; telecom multimode
SMC connector	Sub Miniature C	Snap	2.5mm
Biconic connector		Screw	2.5mm		Obsolete
Avio connector		Screw			Aerospace and avionics
ADT-UNI connector		Screw	2.5mm		Measurement equipment
Deutsch 1000		Screw			Telecom, obsolete
DIN (LSA)		Screw		IEC 61754-3	Telecom in Germany in 1990s; measurement equipment; obsolete
DMI		Clip	2.5mm		Printed circuit boards
EC		push-pull type		IEC 1754-8	Telecom & CATV networks
F-3000		Snap, with light and dust-cap	1.25mm	IEC 61754-20	Fiber To The Home (LC Compatible)
Fibergate		Snap, with dust-cap	1.25mm		Backplane connector
FSMA		Screw	3.175mm	IEC 60874-2	Datacom, telecom, test and measurement
LuxCis			1.25mm	ARINC 801	PC or APC configurations (note 3)
LX-5		Snap, with light- and dust-cap		IEC 61754-23	High-density connections; rarely used
MIC	Media Interface Connect	Snap	2.5mm		Fiber distributed data interface?(FDDI)
NEC D4		Screw	2.0mm		Common in Japan telecom in 1980s
Opti-Jack		Snap (duplex)
OPTIMATE		Screw			Plastic fiber, obsolete
TOSLINK	Toshiba Link	Snap			Digital audio
VF-45		Snap			Datacom
V-PIN	V-System	Snap (Duplex) Push-pull coupling

Optical circulator

blessedsan — Tue, 14 Sep 2010 02:55:42 +0000

Description of Fiber optic circulator

We provide optical circulator with extra high isolation, Low insertion and return loss, Low polarization dependent loss and polarization mode dispersion.

Optical circular act as signal routers, transmitting light from an input fiber to an output fiber, but directing light that returns along that output fiber to a third port.

Optical circulators perform a similar function as an optical isolator, protecting the input fiber from return power, but also allowing the rejected light to be employed.

Optical circulator Types

Optical circulators include 3-port type, 4-port type and 6-port type. Passing all the intermediate ports in sequence. Optical light transmitted from any of the port in such circulators can be redirected to any other port.

3 Port Polarization Insensitive Optical Circulator

4 Port Polarization Insensitive Optical Circulator

980nm Optical Circulator

1060nm Polarization Insensitive Optical Circulator

C & L-Band Polarization Insensitive Optical Circulator

Features of optical circulator

Low Insertion Loss

Wide Band High Isolation

High Extinction Ratio

Compact In-Line Package

High Stability and Reliability

Epoxy Free on Optical Path

Applications of optical circulator

1. Fiber optic Amplifiers

2. CATV Fiber optic Links

3. Fiber optic Systems Testing

4. Fiber optic LAN Systems

5. Telecommunications

Optical isolator

blessedsan — Tue, 14 Sep 2010 02:58:31 +0000

Description of optical isolator

Optical isolator is passive devices which can allow light to be transmitted in only one direction. Optical isolator are used to prevent any light from reflecting back down the fiber, as this light would enter the source and cause backscattering and feedback problems.

There are two major types of optical isolators: In-line optical isolator and free space optical isolator.

Free space optical isolator:Free space optical isolators, by contrast, do not have an integral connection system. They must be directly mounted to the object that needs isolation.

Single stage free space isolator

Parameter	P Grade	A Grade
Operating wavelength (nm)	1310 or 1550 Or other
Smallest isolation (dB)	>42	>40
Isolation	>28	>26
Inserts most greatly damages (dB)	0.20	0.25
Pass the light aperture (mm)	0.9
Operating temperature (° C)	-5 ~ + 65
Storage temperature (° C)	-40 ~ +85
Maximum work rate (mw)	300

Two-stage free space isolator

Parameter	P Grade	A Grade
Operating wavelength (nm)	1310 or 1550 Or other
Smallest isolation (dB)	>60	>55
Isolation	>48	>46
Inserts most greatly damages (dB)	0.30	0.35
Pass the light aperture (mm)	0.9
Operating temperature (° C)	-5 ~ + 65
Storage temperature (° C)	-40 ~ +85
Maximum work rate (mw)	300

1480nm Single / Dual stage Isolator:

Performance specification

Product name	1480 single stage isolator		1480 dual stage isolator
Parameter	P Grade	A Grade	P Grade	A Grade
Operating wavelength (nm)	1480
Typical peak isolation (dB)	42	40	55	52
Isolation minimum value *(dB)	32	30	45	44
Insertion loss typical value (dB)	0.4	0.5	0.5	0.6
Insertion loss maximum value(dB)	0.6	0.8	0.7	0.9
Return loss (In/Out) (dB)	> 65/60	> 60/55	> 65/60	> 60/55
Polarization dependent loss (dB)	< 0.05	< 0.1	< 0.05	< 0.1
PMD (dB)	0.2(0.05 available upon request)
Band width (nm)	±15		±30
Operating temperature(°C)	-20 ~ + 70
Storage temperature (°C)	-40 ~ +85
Fiber type	Corning SMF-28
Fiber length	1 rice
Dimensions(mm)	Ø5.5xL35
Power handing (mw)	300

* At 23° C over bandwidth

1060nm Single / Dual Stage optical Isolator

Performance specification

Product name	1060 single stage isolator			1060 dual stage isolator
Parameter	P Grade		A Grade	P Grade	A Grade
Operating wavelength (nm)	1060
Typical peak isolation (dB)	40		38	55	50
Isolation minimum value *(dB)	30		28	45	40
Insertion loss typical value (dB)	1.5		1.8	2.4	2.8
Insertion loss maximum value (dB)	2.0		2.2	3.4	4.2
Return loss (In/Out) (dB)	> 50
Polarization dependent loss (dB)	< 0.15
PMD (dB)	0.20	0.25		0.20	0.25
Band width (nm)	±15			±30
Operating temperature (°C)	-20 ~ + 70
Storage temperature (°C)	-40 ~ +85
Fiber type	Corning hi 1060
Fiber length	1meter
Dimensions(mm)	Ø5.5xL35

L-Band Single / Dual Stage Isolator

Performance specification for L-Band Single / Dual Stage Isolator

Parameter	Single stage optical isolator		Dual stage optical isolator
Grade	P	A	P	A
Operating wavelength (nm)	1310 or 1550
Typical peak isolation (dB) (23°C)	>42	>40	>52	>50
Minimum value isolation * (dB) (23°C)	>32	>30	>46	>45
Insertion loss typical value ** (dB)	0.3	0.4	0.4	0.5
Insertion loss maximum value *** (dB)	<0.5	<0.7	<0.6	<0.8
Return loss (In/Out) (dB)	>65/60	>60/55	>65/60	>60/55
PDL (dB)	< 0.05	< 0.1	< 0.05	< 0.1
PMD (dB)	0.2(0.05 available upon request)
Band width (nm)	±15		±30
Operating temperature (°C)	-20 ~ + 70
Storage temperature (°C)	-40 ~ +85
Fiber type	Corning SMF-28
Fiber length	1m
Dimensions(mm)	5.5×30
Power handing (mw)	300

Polarization-sensitive single/dual stage optical isolator

Performance specifications for Polarization-sensitive single/dual stage isolator

Parameter	Single stage optical isolator		Dual stage optical isolator
Grade	P	A	P	A
Operating wavelength (nm)	1310 or 1550
Typical peak value isolation (dB) (23°C)	>42	>40	>52	>50
Minimum value isolation * (dB) (23°C)	>32	>30	>46	>45
Insertion loss typical value ** (dB)	0.3	0.4	0.4	0.5
Insertion loss maximum value *** (dB)	<0.5	<0.7	<0.6	<0.8
Return loss (In/Out) (dB)	>65/60	>60/55	>65/60	>60/55
PDL (dB)	< 0.05	< 0.1	< 0.05	< 0.1
PMD (dB)	0.2(0.05 available upon request)
Band width (nm)	±15		±30
Operating temperature (°C)	-20 ~ + 70
Storage temperature (°C)	-40 ~ +85
Fiber type	Corning SMF-28
Fiber length	1m
Dimensions(mm)	5.5×30
Power handing (mw)	300

Pigtail optical Isolator

Parameter	Premium
Operating Wavelength (nm)	1310 ~ 1550
Isolation(@23°C) (dB)	>30
Insertion Loss(@23°C (dB) (Without Connector)	<0.30
Outer Diameter (mm)	F2.5
Capillary End Angle (°)	6~8
Fiber Type	F0.9mm SMF-28
Connector Type	FC; SC; ST; LC
Operating Temperature (° C)	-20 to + 70
Storage Temperature (° C)	-40 to +85

High Power optical Isolator

Fiber Isolator application

Fiber isolators are used in many fiber optic applications in corporate, industrial, and laboratory settings. They are reliable devices when used in conjunction with fiber optic amplifiers, fiber optic ring lasers, fiber optic links in CATV applications, and high-speed and coherent fiber optic communication systems. Single polarization fiber optic isolators are also used with laser diodes, gyroscopic systems, fiber optic modular interfaces, and a variety of other mechanical control and testing applications

Quick Connector

editor — Fri, 16 Mar 2012 09:09:30 +0000

Quick connectors make fiber terminations quick, easy and reliable. These fiber optic connectors offer terminations without any hassles and require no epoxy, no polishing, no splicing, no heating and can achieve similar excellent transmission parameters as standard polishing and splicing technology. We can greatly reduce the assembly and set up time. The pre-polished connectors are mainly applied to FTTH cable in FTTH projects, directly in the end user site.

Features of Quick Connectors:

1. Compatible with standard SC connectors;
2. Field installable, cost effective, user friendly;
3. PC, APC polishing optional;
4. No electricity required;
5. FTTH cable, fiber optic cable optional;
6. Reliable durable and superior optical performance

Performance Specifications

Insertion Loss	≤0.2db
Return Loss	PC≥35db， UPC≥50db，APC≥60db
Cable Diameter	0.9mm, 2.0mm, 3.0mm, 2*3.0mm
Operating Temperature（°C）	-40~~+85
Product Description	* Crimping parts use new and unique structural design: no gluing, polishing and consumables
Features	* Precise Mechanical Dimensions
Application	* For the opening of the FTTH Fiber Optic Terminal

mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Stage	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Single Stage	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Dual Stage
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Operating Wavelength (nm)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">1310 or 1550
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Typical Peak Isolation (dB)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">42	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">55
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Minimum Isolation * (dB)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">32	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">42
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Typical Insertion Loss** (dB)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">0.5	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">0.65
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Maximum Insertion Loss*** (dB)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">0.7	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">0.8
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Return loss (In/Out) (dB)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">> mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">60/55	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">> mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">60/55
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">PDL (dB)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">< mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">0.05	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">< mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">0.1
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">PMD (dB)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">0.2(0.05 available upon request)
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Bandwidth (nm)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">15	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">30
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Operating Temperature (° C)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">-20 ~ + 70
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Storage Temperature (° C)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">-40 ~ +85
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Fiber Type	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Corning SMF-28
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Fiber Length (Min.)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">1 meter each end
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Package Dimension (mm)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Ø 5.5xL34(L38 for 900um Jacket)
mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">Power Handling (mW)	mso-fareast-font-family:宋体;color:#555555;mso-font-kerning:0pt">2000

Optical products

Fiber optic patch cable

Optical adapter

Hybrid adapter

Optical attenuator

optical coupler

PLC splitter

Optical connector

Fiber optic connector types

Fiber optic connectors chart

Optical circulator

Optical isolator

Description of optical isolator

Parameter

Premium

High Power optical Isolator

Fiber Isolator application

Quick Connector